Author Topic: procharger + alky (Read 1695 times)

russellisabel · « **on:** August 29, 2010, 10:09:01 AM »

just wondering what kind of #'s you guys are posting. Im running a pcs1 at 18lbs. of boost, alky injection, cam, 3300 yank stall, long tubes, custome intake and a 90mm throttle body, and more. im at 540rwhp but we are still tuning on the dyno monday.. so estamated 540 to 600, will post dyno sheet this week.. you can see pics of my set up under russisabel, im going to post some hd video this week also when i get it done tomm....so how about it shoot out some dyno results lets hear it for forced induction av's

bluedevil · « **Reply #1 on:** August 29, 2010, 10:11:54 AM »

Thats impressive!

I never dyno mine. I run non intercooled Vortech.

russellisabel · « **Reply #2 on:** August 29, 2010, 10:16:25 AM »

3 core intercooler huge diff.

bluedevil · « **Reply #3 on:** August 29, 2010, 10:18:25 AM »

Quote from: russellisabel on August 29, 2010, 10:16:25 AM

3 core intercooler huge diff.

Ive been meaning to add the cooler but heck, i hardly ever drive the AV.

Keep us posted on the gains

russellisabel · « **Reply #4 on:** August 29, 2010, 10:20:16 AM »

going to finish up tomm. will post the dyno sheet. dying to get this to a av gtg!

Main One · « **Reply #5 on:** August 29, 2010, 03:45:40 PM »

Sounds impressive.

KY_Bob got close to 500 rwhp with a few less pounds of boost, meth injection and nitrous.

MyBigToy · « **Reply #6 on:** August 29, 2010, 04:36:51 PM »

Pretty impressive numbers.

So tell us about your other mods - surely you can't still be running the stock rear end or 4L60E?

russellisabel · « **Reply #7 on:** August 30, 2010, 07:58:36 AM »

good morning, headed out to the shop shortly, well I installed a new 460 with billet servos, hardend shell, hardend plate,transgo hd shift kit, 3300 stall yank hd converter, and a TCI flex plate, I cracked the stock one, I hope this set up holds...so far so good however slowhawk performance has a 480 built to hold 1200hp and is going to prep it for me and i will have on stand by.. as for the rear..both front and rear gear sets have been swaped out to 4.11's and they are from liberty gear they were ordered for this applacation. just looking at them they were way beefier than the gm units..the set up has held so far with 400rwhp so we just did some upgrades to get another 130-200 more..short list is edelbrock intake,cam,90mm throttle body, 90 degree adapter,custom wire harness,long tube headers,8 rib balancer,true dual exhaust with x-pipe and dual flowmaster 44 series.(this is what the high hp mustangs at the track are using). alky injection,alky control unit & a crap load of selinoids to make it dual purpose aka.. daily driver and track truck.. custom tune and dyno by slowhawk performance.. a procharger running 16-18lbs. of boost which Don(slowhawk) will be dialing in this morning...there are lots of other upgrades like the brakes ect.. however thats the short version of the drive train.

russellisabel · « **Reply #8 on:** August 30, 2010, 11:41:59 AM »

ok bad day so far. it seems that the 2006 av has a stand alone cpu mapping its the same up to 2005 and different for 2007. so know when trying to do the speed dens tune it wont take properly to dial it in so we are having a new cpu file written for the truck which takes about 8 hrs. so now maybe wed. night or thur. however thur. im flying to st. louis for a fam reunion and wont be back untill sun. and monday is labor day so thats tue. and then I might have to go back offshore tue.(back to work)

so everyone please pray to the gm gods that it gets done by wed.

oHIobellboy · « **Reply #9 on:** August 30, 2010, 12:16:55 PM »

Quote from: russellisabel on August 30, 2010, 11:41:59 AM

ok bad day so far. it seems that the 2006 av has a stand alone cpu mapping its the same up to 2005 and different for 2007. so know when trying to do the speed dens tune it wont take properly to dial it in so we are having a new cpu file written for the truck which takes about 8 hrs. so now maybe wed. night or thur. however thur. im flying to st. louis for a fam reunion and wont be back untill sun. and monday is labor day so thats tue. and then I might have to go back offshore tue.(back to work) so everyone please pray to the gm gods that it gets done by wed.

We're having our annual Bratfest that Sunday in St. Charles. Looks like you'll miss it by a few hours do to the flight.

russellisabel · « **Reply #10 on:** August 30, 2010, 04:44:30 PM »

yea I know thats how my luck has been going the last two weeks.. Ive been trying to get to a gtg or truck show and always miss it somehow..bummmmed! well new cpu map program tomm and back on the dyno all morning hopefully I can get her set tomm. or wed.

russellisabel · « **Reply #11 on:** August 31, 2010, 09:30:57 AM »

just got the call we got 485rwhp in a 2nd gear pull. 3rd gear pull puts it at 560rwhp..sweet!!!!

will be picking it up later this afternoon.

ThE KiiD · « **Reply #12 on:** August 31, 2010, 09:38:53 AM »

congrats

cant wait to see it at a gtg

Main One · « **Reply #13 on:** August 31, 2010, 11:25:13 AM »

Quote from: russellisabel on August 31, 2010, 09:30:57 AM

just got the call we got 485rwhp in a 2nd gear pull. 3rd gear pull puts it at 560rwhp..sweet!!!! will be picking it up later this afternoon.

Impressive!!!

oHIobellboy · « **Reply #14 on:** August 31, 2010, 12:36:47 PM »

Quote from: russellisabel on August 31, 2010, 09:30:57 AM

just got the call we got 485rwhp in a 2nd gear pull. 3rd gear pull puts it at 560rwhp..sweet!!!! will be picking it up later this afternoon.

NICE

Now where's your buddy with the camcorder at? Some Youtube video will be sweet!

russellisabel · « **Reply #15 on:** September 01, 2010, 08:44:42 PM »

just posted a quick video on the clubs facebook site. check it out and tell me what you think

oHIobellboy · « **Reply #16 on:** September 01, 2010, 08:51:59 PM »

Quote from: russellisabel on September 01, 2010, 08:44:42 PM

just posted a quick video on the clubs facebook site. check it out and tell me what you think

I'll have to check that out. Hope it loads on my phone. Sometimes working nights really sux.

Ski Edition · « **Reply #17 on:** September 01, 2010, 08:53:01 PM »

load it on here for us non-FB people.

russellisabel · « **Reply #18 on:** September 01, 2010, 08:56:06 PM »

when i get back ill do some with my helmet cam from my mx helmet, this will give good sound and a first person view from a good launch and 30mph roll launch from inside I think you guys will really like that.. it kinda looks like the driver cam at nascar..

russellisabel · « **Reply #19 on:** September 01, 2010, 08:58:05 PM »

having trouble trying to load to this site I think the file is to big. or it wont reconize the format seeing as i used my droid-x phone to take it.

russellisabel · « **Reply #20 on:** September 01, 2010, 09:11:12 PM »

I see member videos can someone tell me how to load it there? getting stuck a quik walk through and maybe i can get it in

oHIobellboy · « **Reply #21 on:** September 01, 2010, 09:42:12 PM »

Quote from: russellisabel on September 01, 2010, 09:11:12 PM

I see member videos can someone tell me how to load it there? getting stuck a quik walk through and maybe i can get it in

The current software will not allow it to play from the gallery unfortunately. It's best to link it from an outside source such YouTube.

russellisabel · « **Reply #22 on:** September 02, 2010, 06:17:10 AM »

ok here it is on youtube...loaded it up for everyone.


560rwhp custom avalanche ss

russellisabel · « **Reply #23 on:** September 02, 2010, 06:35:08 AM »

here is how it sounds!!


FILE0002

ThE KiiD · « **Reply #24 on:** September 02, 2010, 08:14:25 PM »

very nice man

thats music to my ears hearing that truck whistling such a beautiful song

oHIobellboy · « **Reply #25 on:** September 03, 2010, 05:14:08 AM »

Very nice indeed

Cute kid and a great looking shepard also.