Topic: procharger + alky

[russellisabel]

just wondering what kind of #'s you guys are posting. Im running a pcs1 at 18lbs. of boost, alky injection, cam, 3300 yank stall, long tubes, custome intake and a 90mm throttle body, and more. im at 540rwhp but we are still tuning on the dyno monday.. so estamated 540 to 600, will post dyno sheet this week.. you can see pics of my set up under russisabel, im going to post some hd video this week also when i get it done tomm....so how about it shoot out some dyno results lets hear it for forced induction av's

[bluedevil]

Thats impressive!

I never dyno mine.  I run non intercooled Vortech.

[russellisabel]

3 core intercooler huge diff.

[bluedevil]

3 core intercooler huge diff.

Ive been meaning to add the cooler but heck, i hardly ever drive the AV.



Keep us posted on the gains

[russellisabel]

going to finish up tomm. will post the dyno sheet. dying to get this to a av gtg!

[Main One]

Sounds impressive.

KY_Bob got close to 500 rwhp with a few less pounds of boost, meth injection and nitrous.

[MyBigToy]

Pretty impressive numbers.

So tell us about your other mods - surely you can't still be running the stock rear end or 4L60E?

[russellisabel]

good morning, headed out to the shop shortly, well I installed a new 460 with billet servos, hardend shell, hardend plate,transgo hd shift kit, 3300 stall yank hd converter, and a TCI flex plate, I cracked the stock one, I hope this set up holds...so far so good however slowhawk performance has a 480 built to hold 1200hp and is going to prep it for me and i will have on stand by.. as for the rear..both front and rear gear sets have been swaped out to 4.11's and they are from liberty gear they were ordered for this applacation. just looking at them they were way beefier than the gm units..the set up has held so far with 400rwhp so we just did some upgrades to get another 130-200 more..short list is edelbrock intake,cam,90mm throttle body, 90 degree adapter,custom wire harness,long tube headers,8 rib balancer,true dual exhaust with x-pipe and dual flowmaster 44 series.(this is what the high hp mustangs at the track are using). alky injection,alky control unit & a crap load of selinoids to make it dual purpose aka.. daily driver and track truck.. custom tune and dyno by slowhawk performance.. a procharger running 16-18lbs. of boost which Don(slowhawk) will be dialing in this morning...there are lots of other upgrades like the brakes ect.. however thats the short version of the drive train.

[russellisabel]

ok bad day so far. it seems that the 2006 av has a stand alone cpu mapping its the same up to 2005 and different for 2007. so know when trying to do the speed dens tune it wont take properly to dial it in so we are having a new cpu file written for the truck which takes about 8 hrs. so now maybe wed. night or thur. however thur. im flying to st. louis for a fam reunion and wont be back untill sun. and monday is labor day so thats tue. and then I might have to go back offshore tue.(back to work) so everyone please pray to the gm gods that it gets done by wed.

[oHIobellboy]

ok bad day so far. it seems that the 2006 av has a stand alone cpu mapping its the same up to 2005 and different for 2007. so know when trying to do the speed dens tune it wont take properly to dial it in so we are having a new cpu file written for the truck which takes about 8 hrs. so now maybe wed. night or thur. however thur. im flying to st. louis for a fam reunion and wont be back untill sun. and monday is labor day so thats tue. and then I might have to go back offshore tue.(back to work) so everyone please pray to the gm gods that it gets done by wed.

  We're having our annual Bratfest that Sunday in St. Charles. Looks like you'll miss it by a few hours do to the flight.