Welcome, Guest. Please login or register.
Connect with Facebook


« previous next »
Pages: « 1 2  All   Go Down

Author Topic: Torsion Key - Leveling Kit Installation  (Read 2908 times)

0 Members and 3 Guests are viewing this topic.

Offline R3D DR4G0N

  • Full Member
  • *****
    • Joined: 04.05.11
  • Posts: 399
  • Gender: Male
  • Try gettin' past this Bloodhound
  • View Gallery
    • My YouTube Channel
  • Chapter: Northeast
  • Color: Sport Metallic Red
  • Location: Owego, NY
  • Year: 2004
Re: Torsion Key - Leveling Kit Installation
« Reply #10 on: July 12, 2011, 07:23:34 AM »
Quote from: Ski Edition on July 12, 2011, 07:06:55 AM
Don't let my war wounds scare you from doing this mod.  I was ill equipped in the tool department to make the job easy.  I just had a short handle socket set and made the job harder than it should have been.  Have done this a couple more times with the proper tools and accomplished in a fraction of the time.  Just make sure that you jack up the front end, put it on stands and you should be all set.  I did do the free loaner from AZ on the gear puller. Good luck and make sure to get an alignment when done.

It really sounds like I have nothing to worry about then, especially if Im going to douse each stock key with pb blaster every day for a week until i do the job, AND get the gear puller from autozone.  my g/f's brother(s) should have any other necessary tools.  Im soo excited!

Jon

Logged
"There's a freshwater source up ahead; better drink my own urine." - Bear Grylls

"If you're flammable and have legs, you are not a fire hazard." - Mitch Hedberg

Offline Ski Edition

  • CAC 2010 Supporting Member
  • Full Member
  • *
  • *
  • *
  • *
  • *
    • Joined: 12.02.08
  • Posts: 1393
  • Gender: Male
  • View Gallery
  • Chapter: Southeast
  • Color: Victory Red
  • Location: Wherever Betsy takes me!!
  • Year: 2004
Re: Torsion Key - Leveling Kit Installation
« Reply #11 on: July 12, 2011, 04:10:00 PM »
Quote from: R3D DR4G0N on July 12, 2011, 07:23:34 AM
It really sounds like I have nothing to worry about then, especially if Im going to douse each stock key with pb blaster every day for a week until i do the job, AND get the gear puller from autozone.  my g/f's brother(s) should have any other necessary tools.  Im soo excited!

Jon

You'll be fine!!!  My keys were rusted, but no PB and they came right out.  Good luck!!
Logged


Pages: « 1 2  All   Go Up
« previous next »
Tags:
 

chevrolet


SMF 2.0.2 | SMF © 2012, Simple Machines | TP | DS
© 2012 ChevyAvalancheClub.com
Chevrolet | General Motors | OnStar | Certified Service
Chevrolet Trademark(s) used with the written permission of General Motors.