Topic: Bratfest Modding

[oHIobellboy]

OK, Let's hear what needs to be done this year.


mEYEscndfvrtluv
  Change out '02 mirrors to '03+ signal mirrors. I understand we'll have to run some wires for the signals to function properly. Any hints on this one??

Richie_Rich
  Antenna delete mod.

Fowlhunter and Gayle
SPLs

Tdybr27
Replace grille and bug deflector, new window decal and jimmy jammers. Check LOF

BlueDevil
Finish power locks.

[Richie_Rich]

I have an antenna delete mod to do.

[Main One]

I should have a transmission to install by then!

[oHIobellboy]

I should have a transmission to install by then!

Been letting Osama Bin Morgan drive the avy again? 

Not gonna happen at Bratfest this year pal.

[bluedevil]

I have "0" mods to install 

[oHIobellboy]

I have "0" mods to install 

and about 10 to finish  Power locks........ 

[Ski Edition]

I would like to add a bed light to the other side and put them both on a switch by the tailgate.  Haven't even looked into it though. 

[Main One]

I have "0" mods to install 

 

The question for you is, how many critters do you have to exterminate!

[Fowlhunter]

If I get all the stuff I was thinking sail panel lights on my 02 and my girlfriends 05 WBH?  I'll think of more!  Oh, don't forget, 

[tdybr27]

Install "new" billet grille and get the hood deflector I bought LAST Bratfest installed.  Remove current decals from back window, install new CAC decal, maybe install jimmi jammers???

[Zora Arkus-Duntov]

Install "new" billet grille and get the hood deflector I bought LAST Bratfest installed.  Remove current decals from back window, install new CAC decal, maybe install jimmi jammers???

  .....on what?   

[tdybr27]

.....on what?   

The new Fridgeline   

[tdybr27]

Also need to look and see if my LOF is truly broken or just has a short in it.   

[BNASTY]

I have the tailgate power lock install to do.  Anyone have exprience with this one?

B 

[MyBigToy]

I have the tailgate power lock install to do.  Anyone have exprience with this one?

B 

Sorry for the off-topic, but how many miles do you have on your garage queen now?

And I'd love to have the power tailgate lock myself!

[oHIobellboy]

I have the tailgate power lock install to do.  Anyone have exprience with this one?

B 

I helped on one but don't feel comfortable taking a dremmel to someone elses truck.

[Fowlhunter]

I helped on one but don't feel comfortable taking a dremmel to someone elses truck.

I'll do it!!!         

[bluedevil]

I did exterminated the few critters.... 


Say obb,..... i do have the saddlebag and tailgate powerlocks to finish.    Hmmm,..... i should prep the parts on my workbench for bratfest.

[Main One]

I have the tailgate power lock install to do.  Anyone have exprience with this one?

B 

I do, but it's been a while.

[BNASTY]

Sorry for the off-topic, but how many miles do you have on your garage queen now?

I don't drive it as much as I should, but I did take it to Lake of the Ozarks this summer and it only got rained on once  ( lots of bugs on the way home also )

54,XXX miles 

[tdybr27]

Train horn install?   

[oHIobellboy]

Train horn install?   

no help from me on that one. Sorry. I've spent over 8 hours on one before in my driveway helping/doing most of it myself. Way too time consuming.

[tdybr27]

no help from me on that one. Sorry. I've spent over 8 hours on one before in my driveway helping/doing most of it myself. Way too time consuming.

Oh I know.  It's just wishful thinking.   I need to set up a weekend sometime and go visit somebody to have it installed.   

[Ski Edition]

Bought a Platinum cluster from PP almost 2 years ago and now I have one of the backlights on the fuel guage that has gone out.  Anyone have any experience to help me out with that?  Called their Tech line and they will do it for $200 and be without my cluster for 7-10 days.  Help and thanks!!   

[oHIobellboy]

Bought a Platinum cluster from PP almost 2 years ago and now I have one of the backlights on the fuel guage that has gone out.  Anyone have any experience to help me out with that?  Called their Tech line and they will do it for $200 and be without my cluster for 7-10 days.  Help and thanks!!   

I've had mine apart a few times doing the stepper motor. I never did look at the lights that are in there. PrimeP wouldn't do any better than that on the repair? My factory cluster has never lost a light in it. Knock wood.

[Ski Edition]

I sent PP a msg when it happened and his wife referred me to the tech line. Now I sent him another msg, but don't expect the response to be any different.

[oHIobellboy]

I sent PP a msg when it happened and his wife referred me to the tech line. Now I sent him another msg, but don't expect the response to be any different.

You any good with a soldering iron? Here's the write up on the stepper motor. In one of the pix you can see the bulbs.
http://www.chevyavalancheclub.com/index.php?action=articles;sa=view;article=60

[Ski Edition]

NO--never used one. I'll check it out when I get to my computer. Thanks OBB!!

[trAVelingman]

NO--never used one. I'll check it out when I get to my computer. Thanks OBB!!

I used a soldering iron once and melted widow's new jacket with it, remember that Ski?

[Ski Edition]

I used a soldering iron once and melted widow's new jacket with it, remember that Ski?

Yep--I thought she was going to make herself a widow!!!  You're good at burning things.  Remember my T-shirts that you scorched with the light??  They all look like moths ate them now!! 
I'd definitely have to get out my reading glasses to tackle something like that!! 

[oHIobellboy]

I used a soldering iron once and melted widow's new jacket with it, remember that Ski?

Yep--I thought she was going to make herself a widow!!!  You're good at burning things.  Remember my T-shirts that you scorched with the light??  They all look like moths ate them now!! 
I'd definitely have to get out my reading glasses to tackle something like that!! 

Note to self. Don't let trAV do any modding at Bratfest that would require a heat source. 

[trAVelingman]

Note to self. Don't let trAV do any modding at Bratfest that would require a heat source. 

As long as it's not 20 degrees outside, we'll be alright.  We had been working all day in a FREEZING garage and we were teeth chattering and arms and hands trembling from the cold trying to solder stuff.....

[Zora Arkus-Duntov]

Note to self. Don't let trAV do any modding at Bratfest that would require a heat source. 

I've seen trAV smile and help others with their modding while wearing one of these.



Your safe as long as he's holding something ice cold. 

[Ski Edition]

As long as it's not 20 degrees outside, we'll be alright.  We had been working all day in a FREEZING garage and we were teeth chattering and arms and hands trembling from the cold trying to solder stuff.....

That was indeed a BRUTAL day of modding!!!!!!!!!!!  It took me a week to thaw out!!  I have to say that the sail panel lights are still my favorite mod though!!     The soldering iron wasn't putting off that much heat.  Trying to use the wife's jacket for kindling!!   

[chevyfan]

How much work is it to move the trailer wiring plug to the bumper? That is definately something I would like to get done just not comfortable doing it by myself. Other than that I have some LED's I would like to  get put under the dash and wired in. I might think of some other stuff later.

[oHIobellboy]

How much work is it to move the trailer wiring plug to the bumper? That is definately something I would like to get done just not comfortable doing it by myself. Other than that I have some LED's I would like to  get put under the dash and wired in. I might think of some other stuff later.

I've not seen anyone move the plug before. Does the plug detach from where it's mounted now? Are you talking about putting it flush mount in the bumper?

[Ski Edition]

I sent PP a msg when it happened and his wife referred me to the tech line. Now I sent him another msg, but don't expect the response to be any different.

Just as I thought.  Response back from PP.

Hello, sorry but they only honor up to the warranty expiration.  I would live with it or open it up and try to fix the light yourself.  I mean, what are you going to do, break it?         

[MyBigToy]

How much work is it to move the trailer wiring plug to the bumper? That is definately something I would like to get done just not comfortable doing it by myself. Other than that I have some LED's I would like to  get put under the dash and wired in. I might think of some other stuff later.

I don't remember how long it took me; it's been too long ago but I don't remember it taking more than an hour and suspect it's closer to a half hour. It's a simple hole saw cut of the proper size, then cut the "keys" into the cladding. I did that with a stout-bladed razor knife (I didn't have a Dremel tool at the time and beggars can't be choosers). As I remember it I used a Sawzall to cut the stock bracket off and used it as a template for the "keys". It's really a pretty simple operation.

[desirehrdwd]

Would really like to get a key fob connected to the HORN. Also if someone (OBB) knows how to link my sails to the turns only w/o the brakes that would be sweet.

Parts list?

[oHIobellboy]

Would really like to get a key fob connected to the HORN. Also if someone (OBB) knows how to link my sails to the turns only w/o the brakes that would be sweet.

Parts list?

I use a Pilot 4 channel remote for my horn and strobes.  Just like Shopolot's only without the water I'm at work right now so it's a little hard for me to dig up that part number. The lights won't be a problem. Just have to move a wire from the trailer wiring to the tail light.

[Fowlhunter]

Need to repair Gale's tailgate torsion bar, when it was originally done (Bratfest V) the hole was drilled in the wrong spot (off about 3/8").  The torsion bar is coming out of the bottom of the tailgate, when you look at the bar with the tailgate open (left side of tailgate) it's not straight either.   

[chevyfan]

The trailer plug would be installed next to the license plate opposite the lock for the spair. I know the new Silverado's have them there.

[oHIobellboy]

Would really like to get a key fob connected to the HORN. Also if someone (OBB) knows how to link my sails to the turns only w/o the brakes that would be sweet.

Parts list?

Here's the part number from Pilot   ---  PL-SW29

[desirehrdwd]

Thanks, Mike will pick it up soon, so we can get it done. I'm thinking to mount it somewhere waterproof!! hehe.

Any resistors needed for the turns?

[oHIobellboy]

Thanks, Mike will pick it up soon, so we can get it done. I'm thinking to mount it somewhere waterproof!! hehe.

Any resistors needed for the turns?

Is that the only thing you want them tied into is the Turns? If so, nope. Turns only you don't want a resistor that way they get full light when flashing.

[CntrySngr72]

I have no mods for Bratfest...I think I took up enough time at the last one I attended! 

[desirehrdwd]

Is that the only thing you want them tied into is the Turns? If so, nope. Turns only you don't want a resistor that way they get full light when flashing.

Thanks see ya there~!!!

[Main One]

I have no mods for Bratfest...I think I took up enough time at the last one I attended! 

I could stand to put on a second coat of the cladding stuff of yours that I applied down at the Amish gtg.....   

[Ski Edition]

How about a turbo job in the parking lot?   

[CntrySngr72]

I could stand to put on a second coat of the cladding stuff of yours that I applied down at the Amish gtg.....   

Refinish Restorer?  I'm ganna need another can before too long!! 

[Ski Edition]

My can is getting a little skinny too     (not literally), but I'll bring it.

[Main One]

Refinish Restorer?  I'm ganna need another can before too long!! 

Yeah, that's the stuff!

[MyBigToy]

Refinish Restorer?  I'm ganna need another can before too long!! 

It's a shame I didn't know that; we could have saved some on shipping costs. I've got a can on the way right now. I've never used it yet (used STP Son of A Gun and Back to Black) and my sail panels and bed panels are starting to weather.

[Fowlhunter]

It's a shame I didn't know that; we could have saved some on shipping costs. I've got a can on the way right now. I've never used it yet (used STP Son of A Gun and Back to Black) and my sail panels and bed panels are starting to weather.

Oh, your kidding me. I just purchased a can from Ditchek ($52.75 with shipping) to use on Gale's WBH.  Waiting for it to arrive.

[oHIobellboy]

Refinish Restorer?  I'm ganna need another can before too long!! 

You drinking that stuff? I still have about 1/2 can. 

[CntrySngr72]

You drinking that stuff? I still have about 1/2 can. 

No...a co-worker borrowed the can for his AV and spilled about 1/3rd of the can out 

He gave me $25 or so towards it, so I didn't complain too much though. 

[oHIobellboy]

IIRC, when I ordered that case, the breakdown came to $42 per can. That's a nice savings.

[CntrySngr72]

IIRC, when I ordered that case, the breakdown came to $42 per can. That's a nice savings.

If anyone orders another case, I could probably sell 2-3 of them locally, as well as one for myself and one for my cousin in NY.  I did his AV while he was here a few weeks ago and he loved it.  Actually, I work with a guy who has a detail shop and sells Jax-Wax products...he might want to buy a case as I know he does a few AV's...if he does, I'll buy another can or two from him.

[chevyfan]

I would by a can also if anyone decides to pull the trigger on the case. Let me know!

[Ski Edition]

I would by a can also if anyone decides to pull the trigger on the case. Let me know!

I would take one and another TN member is looking for one also. 

[MyBigToy]

Gee, I guess somebody should have thought about this group purchase prior to Bratfest, huh? 

[CntrySngr72]

Gee, I guess somebody should have thought about this group purchase prior to Bratfest, huh? 

There's still a few weeks...isn't it enough time?  I've never ordered any...I bought mine at Bratfest 2 years ago. 

[oHIobellboy]

There's still a few weeks...isn't it enough time?  I've never ordered any...I bought mine at Bratfest 2 years ago. 

I don't know if that would be enough time. Someone would have to call Ditchek to check availability.

[kklobe]

You can add me to the order if anyone is sending one out.  I would love to get my hands on this stuff.  I still don't know about work, but even if I can't make it I can always send the funds electronically if needed!

[Richie_Rich]

I'd like one too.

[dnice58]

count me in too

[mEYEscndfvrtluv]

I have "0" mods to install 

actually bringing an AV to bratfest would be a great mod Mick!

[oHIobellboy]

actually bringing an AV to bratfest would be a great mod Mick!

OOOOOOOOOHHHHH

Score Doc 1
          BD   0


  

[Fowlhunter]

I received my can of Refinish Restorer from Ditchek but don't plan to use it on mine, it's for Gale's.  I also just ordered our (16) sail panel LED's and holders from Oznium.  I guess I need some wire and scotch locks or posi-taps, what will I need to connect to the tail lights?  I want to make mine work with the tails, turns and the brake lights. 

[oHIobellboy]

I received my can of Refinish Restorer from Ditchek but don't plan to use it on mine, it's for Gale's.  I also just ordered our (16) sail panel LED's and holders from Oznium.  I guess I need some wire and scotch locks or posi-taps, what will I need to connect to the tail lights?  I want to make mine work with the tails, turns and the brake lights.

I've got the wire, scotchlocks and I think both the diodes and resistors. Some posi taps would be good.

[Fowlhunter]

I've got the wire, scotchlocks and I think both the diodes and resistors. Some posi taps would be good.

What size posi taps should I pick up?  What size wire?

[oHIobellboy]

What size posi taps should I pick up?  What size wire?

You missed it. I said I've got the wire. It's 22ga single strand. The same stuff I've used on mine and a bunch of others. Posi-taps, I think the blue ones whatever ga that covers.

[Fowlhunter]

You missed it. I said I've got the wire. It's 22ga single strand. The same stuff I've used on mine and a bunch of others. Posi-taps, I think the blue ones whatever ga that covers.

Where can I find the posi taps and how many will I need for 2 AV's? I did a quick search at the Shack but didn't see them.

[oHIobellboy]

Where can I find the posi taps and how many will I need for 2 AV's? I did a quick search at the Shack but didn't see them.

Any parts store. posi taps, t-taps. inline splice. something along that name. I think 4 per Avy but it may be 6. Brain is too frazzled right now to figure it out. Bed time for this guy.

[Richie_Rich]

http://www.amazon.com/Posi-tap-Connector-20-22-Gauge-Wire/dp/B00389UT3I

[Intimidatoruag]

http://shop.ebay.com/i.html?_nkw=posi+connectors&_sacat=0&_dmpt=Motors_Car_Truck_Parts_Accessories&_odkw=posi&_osacat=0&_trksid=p3286.c0.m270.l1313

[oHIobellboy]

Where can I find the posi taps and how many will I need for 2 AV's? I did a quick search at the Shack but didn't see them.

Look under your hood at the connectors we used for tapping into your turns for the wig wag mod. We need the blue one for 14-18ga or something like that.
This reminds me, I need to check my diode,resistor and shrink tube inventory.





Just don't buy any of these or BD will have a heart attack.

[Fowlhunter]

Look under your hood at the connectors we used for tapping into your turns for the wig wag mod. We need the blue one for 14-18ga or something like that.
This reminds me, I need to check my diode,resistor and shrink tube inventory.







Just don't buy any of these or BD will have a heart attack.

My SPL LED arrived and I picked up some blue tap connectors for our SPL LED mod!!!   

[Ski Edition]

Went and got the 2nd cargo light off of a wrecked EXT today.  I want to wire the bed lights together and run it strictly off of a switch inside the bed.  Makes no sense to me to have the button in the cab and want to disable it.  Has anyone done this or can give me some guidance in what I need to accomplish this?  Thanks!

[Main One]

Went and got the 2nd cargo light off of a wrecked EXT today.  I want to wire the bed lights together and run it strictly off of a switch inside the bed.  Makes no sense to me to have the button in the cab and want to disable it.  Has anyone done this or can give me some guidance in what I need to accomplish this?  Thanks!

My 03 came with both lights, but putting a switch in the back is one of my favorite mods.  The way mine is wired, I believe I can turn the lights on with either switch, but I don't use the inside switch any longer.  The indicator by the inside switch works even when the lights are turned on by the switch in back.  I wired mine per the instructions that were on TOS.  It's been 7 years and the details are definitely quite fuzzy in my mind.  Not having to run wiring to both sides definitely made things easier.

[Ski Edition]

I looked over thereN but found 3-4 different ways to do it. Looking for the easiest!

[Main One]

I looked over thereN but found 3-4 different ways to do it. Looking for the easiest!

I'd look over there if I could, LOL! 

[Fowlhunter]

Went and got the 2nd cargo light off of a wrecked EXT today.  I want to wire the bed lights together and run it strictly off of a switch inside the bed.  Makes no sense to me to have the button in the cab and want to disable it.  Has anyone done this or can give me some guidance in what I need to accomplish this?  Thanks!

I like the sounds of this!!!  What switch did you go with?

[Ski Edition]

Found one on-line at camping world that syas cargo switch. Pretty cool.

[oHIobellboy]

Add gas tank straps for mine to the list.  Dam it!  We just had one break 4 miles into the trip. Good thing I carry ratchet straps in the saddlebag.

[Richie_Rich]

What kind of tools should I bring?

[oHIobellboy]

What kind of tools should I bring?

Floor jack. Ramp & basic sockets w/extensions for mine.

[Ski Edition]

Add gas tank straps for mine to the list.  Dam it!  We just had one break 4 miles into the trip. Good thing I carry ratchet straps in the saddlebag.

I was at the junkyard yesterday going through a wrecked EXT, but the tank was in the bed.  I could check if the straps are still there! 

[Fowlhunter]

I was at the junkyard yesterday going through a wrecked EXT, but the tank was in the bed.  I could check if the straps are still there!

I've got the fuel tank straps on order from my buddy at the dealer, they should be in Sat morning.

[Ski Edition]

Cool!!  Bedslide is loaded!!

[Fowlhunter]

Cool!!  Bedslide is loaded!!

    

[Fowlhunter]

Found one on-line at camping world that syas cargo switch. Pretty cool.

Is it a pin switch?

[Ski Edition]

I found a thread at TOS and Didit had some for sale in 2007. Sent him a PM and he's sending me one.

[Zora Arkus-Duntov]

Found one on-line at camping world that syas cargo switch. Pretty cool.

You might check out a local boat retailer for a marine rated switch.

[Ski Edition]

Here is a pic of the switch to go in the bed. 

[Fowlhunter]

Here is a pic of the switch to go in the bed.

I like it!!  I thought about doing this with an illuminated switch but I sure do like that one!!!!

[oHIobellboy]

I was at the junkyard yesterday going through a wrecked EXT, but the tank was in the bed.  I could check if the straps are still there! 

I've got the fuel tank straps on order from my buddy at the dealer, they should be in Sat morning.

Thanks to both of you guys 

[Ski Edition]

Beer cold yet?

[oHIobellboy]

Beer cold yet?

Just got out of the hot tub. Need to go buy some yet. Gotta mod the cooler with beer right?

[Ski Edition]

Right. ETA 930

[oHIobellboy]

Right. ETA 930

You aren't posting while driving are you?? I NEVER do that 

[Ski Edition]

Yep

[Ski Edition]

I need to find a place to do some major debugging in the morning.

[Zora Arkus-Duntov]

Yep

  Since thats a yep, how about starting a Bratfest Picture Thread.

[oHIobellboy]

I need to find a place to do some major debugging in the morning.

found a carawash a couple miles up the road and I've got a couple dryer sheets already. You'll be amazed.

[oHIobellboy]

Right. ETA 930

Beer cold yet?

Hmmm,,,10:15 and no Ski yet. Time to drink his beer so it doesn't get warm 

[oHIobellboy]

Hmmm,,,10:15 and no Ski yet. Time to drink his beer so it doesn't get warm 

Well, he finally made it. Guess it's time to demod the cooler

[Richie_Rich]

I'll be sanding drywall all day today.

Anyone want to come over and help?

[Richie_Rich]

Hello?............tap, tap ,tap

Is this thing on?

cricket.........cricket........

Guess I'll have to finish it myself.


Anyone want to do some painting?

[oHIobellboy]

Hello?............tap, tap ,tap

Is this thing on?

cricket.........cricket........

Guess I'll have to finish it myself.


Anyone want to do some painting?

Put the paint brush away. Come meet us for burgers and drinks. B.Halls We have a thread on it here somewhere. 

[Richie_Rich]

I wish I could, but I'm in the dog house.
This room was supposed to be finished May 5th.
I'm only 4 months late

[MyBigToy]

I wish I could, but I'm in the dog house.
This room was supposed to be finished May 5th.
I'm only 4 months late

You can't be in the doghouse too bad; you just got a new Corvette. 

[oHIobellboy]

Ski and I are meeting FH about 8 to change out the straps on my gas tank. Everyone else can show up whenever. See y'all in a little while.