Topic: Bumper Cupholder Test

[Alaska_AV]

I thought about snagging it just before you split that day

[oHIobellboy]

I thought about snagging it just before you split that day

Thanks pal. 

  

[letsndy]

can anyone guide me to a link where i can find the right size cup for the tailgate? i have looked at boat stores, bass pro shop, and ebay and i cant find them....... HELP!!!! lol i really wanna get this done..

[oHIobellboy]

can anyone guide me to a link where i can find the right size cup for the tailgate? i have looked at boat stores, bass pro shop, and ebay and i cant find them....... HELP!!!! lol i really wanna get this done..

Here's the 3" x 3" ones on eBay 
http://cgi.ebay.com/ebaymotors/Seasense-Recessed-Cup-Holder-3-X3-Black-boat-50091007-_W0QQcmdZViewItemQQhashZitem3f02988695QQitemZ270626490005QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear#ht_2316wt_720

Use those for the bumper and get some 3" across by 2 5/8 deep for the tailgate. I bet that seller has both.

Get them ordered and follow me next Fri when I blow through Indy on the way to Bratfest and we'll get them put in.

[letsndy]

Here's the 3" x 3" ones on eBay 
http://cgi.ebay.com/ebaymotors/Seasense-Recessed-Cup-Holder-3-X3-Black-boat-50091007-_W0QQcmdZViewItemQQhashZitem3f02988695QQitemZ270626490005QQptZBoatQ5fPartsQ5fAccessoriesQ5fGear#ht_2316wt_720

Use those for the bumper and get some 3" across by 2 5/8 deep for the tailgate. I bet that seller has both.

Get them ordered and follow me next Fri when I blow through Indy on the way to Bratfest and we'll get them put in.

thanks, i already bought the 3'' ones for the bumper. those are done. just cant find the 2 5/8 ones

[oHIobellboy]

thanks, i already bought the 3'' ones for the bumper. those are done. just cant find the 2 5/8 ones

I was wrong on the depth. I just went out and measured the inside depth on mine. They're 2 1/4 on the inside so I think the overall is 2 3/8. I'm looking on ebay now for the seller I used.

This is the seller I got my TG ones from. These are 2 1/4 inches deep and should work for the TG
http://cgi.ebay.com/ebaymotors/Black-Plastic-Cup-Holder-RV-Boats-Car-Truck-Inserts-_W0QQcmdZViewItemQQhashZitem25523d808dQQitemZ160293552269QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


Same inside measurements as mine 

[letsndy]

I was wrong on the depth. I just went out and measured the inside depth on mine. They're 2 1/4 on the inside so I think the overall is 2 3/8. I'm looking on ebay now for the seller I used.

This is the seller I got my TG ones from. These are 2 1/4 inches deep and should work for the TG
http://cgi.ebay.com/ebaymotors/Black-Plastic-Cup-Holder-RV-Boats-Car-Truck-Inserts-_W0QQcmdZViewItemQQhashZitem25523d808dQQitemZ160293552269QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories


Same inside measurements as mine 

your the best! thank you!

[oHIobellboy]

Well, it sure was windy around Indy today. We took a rest stop on the east side of Indy and my can was still there. We stopped to eat in Terre Haute and it's gone. Almost 17,000 and a little over 13 months.
Guess we start a new one at Bratfest

[Ski Edition]

Well, it sure was windy around Indy today. We took a rest stop on the east side of Indy and my can was still there. We stopped to eat in Terre Haute and it's gone. Almost 17,000 and a little over 13 months.
Guess we start a new one at Bratfest

Just hasn't been your day so far!!  Be careful the rest of the trip!  May see ou later if you're out by the pool drinking a cool one!!   

[J_AV]

So I realize I'm resurrecting a thread that hasn't been posted on in almost a year, but I figured what the heck...

Got my bumper cup holders put in today, and LOVE the test haha!  Let's see how long mine lasts