Topic: Possible paint job

[bluedevil]

Just stole these pics from SpikeAv from CAFCNA.

I love the looks of this Av.  Sweet taillights and roll pan.

Im doing this 2 mods after the hood gets installed.But 1st i need to buy new factory taillights from eBay. :thumb:

[Strobin]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

[bluedevil]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

[Strobin]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

[bluedevil]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

[Strobin]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

[bluedevil]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

Dremmel time 

I need to order a taillight off eBay tommorow :thumb: and have my painter get to work on the taiights as soon i recieve them.

[Strobin]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

Dremmel time 

I need to order a taillight off eBay tommorow :thumb: and have my painter get to work on the taiights as soon i recieve them.

You're evil

Make sure you don't drop the new one in excitement

I need to find me a good local painter for when I wanna get my cladding done.

[bluedevil]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

Dremmel time 

I need to order a taillight off eBay tommorow :thumb: and have my painter get to work on the taiights as soon i recieve them.

You're evil

Make sure you don't drop the new one in excitement

I need to find me a good local painter for when I wanna get my cladding done.

Ill have my wife handle them just in case :thumb:
Im thinking hard to have mine done also. Thats what happens when my painter has enuff paint to do several trims.

[Strobin]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

Dremmel time 

I need to order a taillight off eBay tommorow :thumb: and have my painter get to work on the taiights as soon i recieve them.

You're evil

Make sure you don't drop the new one in excitement

I need to find me a good local painter for when I wanna get my cladding done.

Ill have my wife handle them just in case :thumb:
Im thinking hard to have mine done also. Thats what happens when my painter has enuff paint to do several trims.

Atleast for now if you're going to get the roll-pan done make sure he gets that piece of cladding at the bottom of the tailgate at the same time. . . it's going to stick out like a sore thumb even more if you have that roll pan there.

[bluedevil]

Roll pan is very sweet (wish it wasn't so hard to do on cladded AVs) . . . been thinkin about something like that for my tails since I don't really want any of those aftermarket tails on mine. Might do white instead of black and have the still exposed lense smoked (we'll see how that goes)

It should look good with the smoke underneath :thumb:


I think im pitchin' these old carbon fiber ones.

Pitch'm this way . . . could experiment with them. :thumb:

I dont see why not.  But you do know left side is busted and right side is cloudy right?

Yeah you pointed that out at the GTG . . . no worries I'm going to end up opening them up just to see what's possible.  Maybe create some new mod ideas for others.

Dremmel time 

I need to order a taillight off eBay tommorow :thumb: and have my painter get to work on the taiights as soon i recieve them.

You're evil

Make sure you don't drop the new one in excitement

I need to find me a good local painter for when I wanna get my cladding done.

Ill have my wife handle them just in case :thumb:
Im thinking hard to have mine done also. Thats what happens when my painter has enuff paint to do several trims.

Atleast for now if you're going to get the roll-pan done make sure he gets that piece of cladding at the bottom of the tailgate at the same time. . . it's going to stick out like a sore thumb even more if you have that roll pan there.

That will be next.  I need to make money 1st to get roll pan.  $145