Topic: Hard wiring your Radar Detector to Rear View Mirror

[oHIobellboy]

oh sure. add that last pix after I post that shows the 2 yeller wires. 

[BlueDevil]

oh sure. add that last pix after I post that shows the 2 yeller wires. 

Its in my post.  Look for the image and how-to right above it in page 1. 

[boilers94]

Sound like somebody needs some....... :cool:   

[RoarinRow]

Hard wire is the best!   

[Tanner]

Awesome write up BD! 
I was contemplating where and how I was going to do this, and you took all the guesswork away. Thanks!

P.S. -- If your detector is 360*, have you noticed if it works for radars coming from behind you? Just wondering if the overhead console got in the way.

[oHIobellboy]

Awesome write up BD! 
I was contemplating where and how I was going to do this, and you took all the guesswork away. Thanks!

P.S. -- If your detector is 360*, have you noticed if it works for radars coming from behind you? Just wondering if the overhead console got in the way.

My whistler was a 360 and my new cobra is also. Mine is mounted up high which will cut down on the range from the rear a little but I still get signals to it.

[BlueDevil]

Very cool Tanner.  Im glad you like the little mod.   My radar setup works perfect

[Darren]

My whistler was a 360 and my new cobra is also. Mine is mounted up high which will cut down on the range from the rear a little but I still get signals to it.

It also depends on the quality of detector as well.  If you are using a high end such as Escort or Valentine you will be able to pickup 360.

[Tanner]

Just got mine hooked up, works like a charm. Although my connector on the mirror was a lot different than yours, but I figured out where to put the pins. I'll post pics later as soon as I get the chance.

 

[BlueDevil]

This mod is a hit

Look who else done it by this writeup.

http://www.truckforums.com/forum/showthread.php?t=8988

http://forums.pickuptrucks.com/ubbthreads.php?ubb=showflat&Number=564522&page=1