Topic: wig wag drl's

[oHIobellboy]

I am ordering the parts now, should have them installed next week sometime. Also I just did the aoh, and fulltime drls. Do I need diodes to do this? Someone got a wiring diagram they can share?

nope, no diodes needed. Dang, we did 3 sets at Bratfest and didn't take any "how to" pix.    If you ordered the supplies from MCM here in this thread there is the wiring code in that same post. White to ground, black to the turn signal +12v, red and blue gets extended down to wherever you cut the drl wire and spliced into those.

[Fowlhunter]

I am ordering the parts now, should have them installed next week sometime. Also I just did the aoh, and fulltime drls. Do I need diodes to do this? Someone got a wiring diagram they can share?

Not really a wiring diagram but OBB has a thread here somewhere!!  Did I tell you, OBB is the man!!!!!! 

[Chris]

nope, no diodes needed. Dang, we did 3 sets at Bratfest and didn't take any "how to" pix.    If you ordered the supplies from MCM here in this thread there is the wiring code in that same post. White to ground, black to the turn signal +12v, red and blue gets extended down to wherever you cut the drl wire and spliced into those.

I was going to get it done there, but i had an issue with the wires going to the right drl. some cut somewhere.

[Sinners-Inc]

So, I really want to do this Wig-Wag mod...I've already got the FTDRL with ambers, and all on high, but I really want to add the Wig-Wag to the DRL. 

I see that you (oHIobellboy) have done it, does anyone have any clear instructions on doing this.  I read through the posts, and done some searching, but nothing laid out super clear with pictures. 

I'm comfortable splicing wires, but I really have a hard time following the wiring schematics...pictures do 100% more for me.  Does anyone have any they can share?  Or a link to some?

Would be so appriciated.

[oHIobellboy]

So, I really want to do this Wig-Wag mod...I've already got the FTDRL with ambers, and all on high, but I really want to add the Wig-Wag to the DRL. 

I see that you (oHIobellboy) have done it, does anyone have any clear instructions on doing this.  I read through the posts, and done some searching, but nothing laid out super clear with pictures. 

I'm comfortable splicing wires, but I really have a hard time following the wiring schematics...pictures do 100% more for me.  Does anyone have any they can share?  Or a link to some?

Would be so appriciated.

I'm heading out the door for work right now. I'll try to find a few pix tomorrow. I think I have a few.

[Sinners-Inc]

Thanks man.  That would be awesome.  I really want to make it happen, and just need a bit more guidance! :)

[oHIobellboy]

I didn't forget about the pix. I just don't  have any that would help. I'll be doing a set in a few weeks at a gtg so I'll make sure I get some good pix then.

[BnGBleeder]

How do the "wig- wags" look? the earlier links it the thread don't work for me... just wandering what they look like...

[RonJ]

They look sweet!!!!

[oHIobellboy]

How do the "wig- wags" look? the earlier links it the thread don't work for me... just wandering what they look like...

I have to replace the videos. They were stored on Photobucket and they got rid of all video I think. At least the ones that were remixed. I will be doing a set this weekend at the WV GTG and do a full right up with pix and video.