Topic: BlueDevil's Vortech SuperCharger Installation Progress

[woof]

WOW Blue, I step away from the AV club for a couple of months and am totally blown away by the mods you have been doing.  Very impressive.......

[Sunburst05]

Lookin great so far Mick. 

[KY_BOB]

After the tap...I smell a engine cover mod about to begin. ;D

Share what youlearned about the pipe tap.   I must ahve been wrong about the thread thing?? :-[

Yea, I had alread thought about the fact that he's going to have to cut on that pretty blue engine cover  :(


BTW, I did mine on a bench grinder.  I know that a grinder is overkill for plastic but it made a nice smooth radius and looks factory.  I have since given up on the engine cover because the nitrous lines are in the way.  :-\

[KY_BOB]

One more thing....  drilling and tapping the oil pan was a piece of cake thanks to the rotobroack.  You'll be impressed with how well it works and how smooth the cut is.  The way it's designed, it also kicks about 99% of the metal shavings back at you instead of letting them go into the oil pan.

[bluedevil]

Yea, I had alread thought about the fact that he's going to have to cut on that pretty blue engine cover  :(


BTW, I did mine on a bench grinder.  I know that a grinder is overkill for plastic but it made a nice smooth radius and looks factory.  I have since given up on the engine cover because the nitrous lines are in the way.  :-\

I think im going to relocate it  to the thread 2" to the left. I would need a longer screw.   Not sure yet cuz i want everything yall have.    Im getting greedy now    I want NOS,Meth,the works :thumb:

[mEYEscndfvrtluv]

Yea, I had alread thought about the fact that he's going to have to cut on that pretty blue engine cover  :(


BTW, I did mine on a bench grinder.  I know that a grinder is overkill for plastic but it made a nice smooth radius and looks factory.  I have since given up on the engine cover because the nitrous lines are in the way.  :-\

I think im going to relocate it  to the thread 2" to the left. I would need a longer screw.   Not sure yet cuz i want everything yall have.    Im getting greedy now    I want NOS,Meth,the works :thumb:

Are you sure you're not in cahoots with O.J.?

[bluedevil]

Are you sure you're not in cahoots with O.J.?

O.J. needs another glove and the other doesnt fit me.

[mEYEscndfvrtluv]

Are you sure you're not in cahoots with O.J.?

O.J. needs another glove and the other doesnt fit me.

[KY_BOB]

Yea, I had alread thought about the fact that he's going to have to cut on that pretty blue engine cover  :(


BTW, I did mine on a bench grinder.  I know that a grinder is overkill for plastic but it made a nice smooth radius and looks factory.  I have since given up on the engine cover because the nitrous lines are in the way.  :-\

I think im going to relocate it  to the thread 2" to the left. I would need a longer screw.   Not sure yet cuz i want everything yall have.    Im getting greedy now    I want NOS,Meth,the works :thumb:

You haven't even got it running yet and your wanting more?



I like the way you think.  You can scare myscndfvrtride at the next GTG 

[mEYEscndfvrtluv]

Yea, I had alread thought about the fact that he's going to have to cut on that pretty blue engine cover  :(


BTW, I did mine on a bench grinder.  I know that a grinder is overkill for plastic but it made a nice smooth radius and looks factory.  I have since given up on the engine cover because the nitrous lines are in the way.  :-\

I think im going to relocate it  to the thread 2" to the left. I would need a longer screw.   Not sure yet cuz i want everything yall have.    Im getting greedy now    I want NOS,Meth,the works :thumb:

You haven't even got it running yet and your wanting more?



I like the way you think.  You can scare myscndfvrtride at the next GTG 

I wasn't scared for me;it was for my AV you were power swerving towards in the parking lot,you might have spilled the shine!