Topic: Sail Panel Light Push in Clip.

[Fowlhunter]

I spoke with my buddy at the dealer this morning looking for the plastic push-in clip to mount the SPL LED, he gave me a P/N-11519037, my price is $4.40ea.    Yes, that's a total of $35.20 without tax.  This includes the plastic philips screw which I don't need but apparently that's how it's sold? Can anyone verify that this is the correct P/N?  See attached pic.

My 02 has the steel screws instead of the plastic philips with push-in clip so I need to convert to these, has anyone else (with an 02 and steel screws) converted to these and used the Oznium LED's?   

[chevyfan]

I warned ya that they weren't cheap. I will look around and see if I still have the bag they came in.

[oHIobellboy]

 I slept most of the day today. I'll try to go check out the local salvage yard tomorrow and see if there's any left on that '02 they had.

[Fowlhunter]

I warned ya that they weren't cheap. I will look around and see if I still have the bag they came in.

Yes you did, I can't beleive they are that damn much?   

[Fowlhunter]

I slept most of the day today. I'll try to go check out the local salvage yard tomorrow and see if there's any left on that '02 they had.

Very cool, Thanks!  I searched Ebay and couldn't find them.

[oHIobellboy]

You better take one of those screws out of yours and make sure that plastic ring that Chevyfan gave you will fit in there properly. It should but it's always best to double check.

[Fowlhunter]

You better take one of those screws out of yours and make sure that plastic ring that Chevyfan gave you will fit in there properly. It should but it's always best to double check.

That's my plan but I wanted to get something posted and try to get some feelers to verify the part number. 

[MyBigToy]

There's a place in KC that was posted on TOS that sells the cladding clips cheap. I'll be danged if I can remember the name, though. You might be able to get these clips there also.

[Donnie1]

I helped Doc with his last year and he had the screws as well. I think he may have gotten those pushpins from Oznium.

Scratch that, the clips he got were threaded and had a small nut on the back of them.

[MyBigToy]

OK, I looked around a little on TOS, got the clip part number, did a Google search, and here's the company that I remembered:

http://shop.northlandfasteners.com/N20377-Rocker-Panel-Moulding-Clip-N20377.htm

I didn't look around on the site but it's probably worth checking it out.

[Fowlhunter]

OK, I looked around a little on TOS, got the clip part number, did a Google search, and here's the company that I remembered:

http://shop.northlandfasteners.com/N20377-Rocker-Panel-Moulding-Clip-N20377.htm

I didn't look around on the site but it's probably worth checking it out.

Thanks!  I'll take a look and see if I can find what I need.   

[oHIobellboy]

So you got an address you want these sent to or should I wait until Bratfest next year and bring them.

[Fowlhunter]

So you got an address you want these sent to or should I wait until Bratfest next year and bring them.

Look at you go!!!!!!!!!!!!!!!!!!!!    

How many do you have?  John (chevyfan) gave me one and I ordered one from my buddy at the dealer, providing they are the same I should only need 6 but you better send me at least 7.  I'll send you an email with my addy!!

OBB,        !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[oHIobellboy]

How many do you see in the pix? I'll get them in the mail before work tomorrow.

[Fowlhunter]

How many do you see in the pix? I'll get them in the mail before work tomorrow.

Oh, funny guy.  Thanks man!

[Fowlhunter]

So you got an address you want these sent to or should I wait until Bratfest next year and bring them.

You are the man Mike!!!!  I received these on Saturday but haven't had a chance to do anything with them yet.  I'm trying to wrap up a few other mods I had laying around before I go in for surgery. 

 

I installed my new (2nd) upper intermediate steering shaft (clunks worse than the OEM shaft) and my HID high beams and relay harness.

[ThE KiiD]

You are the man Mike!!!!  I received these on Saturday but haven't had a chance to do anything with them yet.  I'm trying to wrap up a few other mods I had laying around before I go in for surgery. 

 

I installed my new (2nd) upper intermediate steering shaft (clunks worse than the OEM shaft) and my HID high beams and relay harness.

1- best of luck on ur surgery

2- how do you like the HiDs in the high beam? ive been considering it but i know it not really good for the ballasts to get turned on n off frequently

[Fowlhunter]

1- best of luck on ur surgery


2- how do you like the HiDs in the high beam? ive been considering it but i know it not really good for the ballasts to get turned on n off frequently

1- Thanks, I appreciate it!

2- OK I guess, I don't like the fact that when I turn them on they need to warm up before I can see.  I need to run a ground wire so the lows stay on when I turn on the highs, I also want the fogs on as well.

[Ski Edition]

AOH with 6 HIDS is an enlightening experience!!   

[Donnie1]

AOH with 6 HIDS is an enlightening experience!!   

For who, you or the other drivers?   

[Ski Edition]

BOTH

[ThE KiiD]

1- Thanks, I appreciate it!

2- OK I guess, I don't like the fact that when I turn them on they need to warm up before I can see.  I need to run a ground wire so the lows stay on when I turn on the highs, I also want the fogs on as well.

no problem

and yea the warming up could get annoying i think im jus going to fake hids in the highs that are colored or jus Sylvannias (i cnt spell  ) what i really want are the HiD offroading lights OMG  i will blind the town with those 

i have four aimed high so who ever is in front of me complains i think if i did this mod n had 6 the cops would definitely give me a ticket for they asked me already how my lights were aimed i jus said factory 
For who, you or the other drivers?