Topic: Sail Panel Light Push in Clip.

[Fowlhunter]

I spoke with my buddy at the dealer this morning looking for the plastic push-in clip to mount the SPL LED, he gave me a P/N-11519037, my price is $4.40ea.    Yes, that's a total of $35.20 without tax.  This includes the plastic philips screw which I don't need but apparently that's how it's sold? Can anyone verify that this is the correct P/N?  See attached pic.

My 02 has the steel screws instead of the plastic philips with push-in clip so I need to convert to these, has anyone else (with an 02 and steel screws) converted to these and used the Oznium LED's?   

[chevyfan]

I warned ya that they weren't cheap. I will look around and see if I still have the bag they came in.

[oHIobellboy]

 I slept most of the day today. I'll try to go check out the local salvage yard tomorrow and see if there's any left on that '02 they had.

[Fowlhunter]

I warned ya that they weren't cheap. I will look around and see if I still have the bag they came in.

Yes you did, I can't beleive they are that damn much?   

[Fowlhunter]

I slept most of the day today. I'll try to go check out the local salvage yard tomorrow and see if there's any left on that '02 they had.

Very cool, Thanks!  I searched Ebay and couldn't find them.

[oHIobellboy]

You better take one of those screws out of yours and make sure that plastic ring that Chevyfan gave you will fit in there properly. It should but it's always best to double check.

[Fowlhunter]

You better take one of those screws out of yours and make sure that plastic ring that Chevyfan gave you will fit in there properly. It should but it's always best to double check.

That's my plan but I wanted to get something posted and try to get some feelers to verify the part number. 

[MyBigToy]

There's a place in KC that was posted on TOS that sells the cladding clips cheap. I'll be danged if I can remember the name, though. You might be able to get these clips there also.

[Donnie1]

I helped Doc with his last year and he had the screws as well. I think he may have gotten those pushpins from Oznium.

Scratch that, the clips he got were threaded and had a small nut on the back of them.

[MyBigToy]

OK, I looked around a little on TOS, got the clip part number, did a Google search, and here's the company that I remembered:

http://shop.northlandfasteners.com/N20377-Rocker-Panel-Moulding-Clip-N20377.htm

I didn't look around on the site but it's probably worth checking it out.